Näytetään kaikki 3 tulosta

  • SpeedBox 3.0 for Brose

    199,00 

    Varoitus

    Huomaa, että tämän tyyppisten muunneltujen sähköpyörien käyttö yleisillä teillä saattaa olla lainvastaista joissakin maissa. Valmistaja ei ota vastuuta vahingoista, jotka johtuvat SpeedBox-tuotteiden käytöstä. SpeedBox-tuotteilla varustettuja sähköpyöriä ei saa käyttää yleisillä teillä, pyöräteillä ja julkisilla paikoilla. SpeedBox-tuotteilla varustettuja sähköpyöriä saa käyttää yksinomaan yksityisellä kiinteistöllä ja täysin omalla vastuulla. SpeedBoxin käyttö voi mitätöidä ebikesi takuun.

    Suosittelemme vahvasti muiden turvaominaisuuksien ja suojavarusteiden käyttöä vammojen estämiseksi.

    PROPERTIES:
    Activation: WALK function/ + – + –
    Maximum speed: unlimited
    Speed limit setting: YES
    Display shows: actual values
    Compatible with motors:
    Brose SPECIALIZED (except for SL models)
    Brose S-MAG
    Brose S
    Brose T
    Not compatible with:
    motors Brose S Mag FIT
    SpeedBox App

    In case of updating the software of your e-bike, uninstall SpeedBox from the e-bike first, update the software and reinstall SpeedBox.

  • Ale!

    SpeedFun Furious Evo (kytkeytyy valokytkimestä) for Brose & Continental

    155,00 

     

    What is SpeedFun Furious Evo ebike tuning for Brose and Continental?

    The function of the Furious Evo tuning device for Brose and Continental is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH in order to obtain a real speed with very high active motor. The maximum speed limit will therefore be dictated by the power of the engine added to the power expressed by one’s legs (info).

    When the tuning device is active, having no communication with the display, it will show the halved data on the display starting from a certain threshold.

    SpeedFun Furious Evo can be activated and deactivated at will and maintains the setting even after the ebike is turned off. It can be installed on ebike with Brose in aluminum (Brose C, Brose T, Brose TF, Brose S) or with Brose engines in magnesium (Brose S Mag) and Continental motors mostly mounted on ebike Axevo, Bergstrom, Besv, BH, Bikel, BMW, Bulls, Campus, Cheetah, Cucuma, Devinci, Diavelo, Douze Cycles, e-Framer, Elops, Fantic, Fischer, FXX Cycles, Head, Hercules, Innata, Kraft Stoff, Leaos, LeeCougan, Olmo, Olympia, M1 Sport Technik, Maxx, Nox Cycles, Neomuv, NSR, Pedal Power, Pedego, Pininfarina, Poison, Pragma Industries, QWIC, Rockrider (Decathlon), Rotwild, Sblocs, Specialized, Sunn, Triobike, VKT regardless of the type of display or side control of the ebike.

    The Furious Evo tuning device for Brose and Continental is available in two versions:

    • – Easy version: supplied already active, it can in any case be activated/deactivated with a very practical system (for more information see the instructions)
    • – On/off lights version: can be activated/deactivated by simply pressing the lights button of the ebike. In this case it is necessary to make sure that the ebike has the lights button and that no lights are installed.

    The device is supplied plug and go ready to use and is installed in a very simple way thanks to the compatible connectors with which no physical modification of the ebike is necessary.

     

    Ebike with Brose and Continental engine where the Furious Evo device was successfully installed

    (this list is illustrative and not exhaustive)

     

    – Rotwild R.X750
    – Specialized Turbo Levo 2020 e 2021

     

    – Fantic xf1 integra 160

     

     

    The main features

    – Totally invisible

    – It can be assembled/disassembled at any time

    – Equipped with compatible connectors that do not require any physical modification to the ebike wiring

    – Allows you to remove the 25 KmH limit up to unlimited speeds (info)

    – Installable in a few minutes, ready to use, plug and go!

    – Suitable for Brose and Continental motors mounted mostly on ebike Axevo, Bergstrom, Besv, BH, Bikel, BMW, Bulls, Campus, Cheetah, Cucuma, Devinci, Diavelo, Douze Cycles, e-Framer, Elops, Fantic, Fischer, FXX Cycles, Head, Hercules, Innata, Kraft Stoff , Leaos, LeeCougan, Olmo, Olympia, M1 Sport Technik, Maxx, Nox Cycles, Neomuv, NSR, Pedal Power, Pedego, Pininfarina, Poison, Pragma Industries, QWIC, Rockrider (Decathlon), Rotwild, Sblocs, Specialized, Sunn, Triobike , VKT and many more

    – Compatible with any type of display or command

    – It is possible to activate/deactivate the device by pressing the lights button (in the on/off light versions) or in a very practical way (in the easy version). More info in the instructions.

    – It does not need external batteries or power

  • SpeedFun Ribelle (näyttää nopeuden) for Brose – Fantic

    185,00 

    Ribelle for Brosen tarkoitus on manipuloida takapyörän pyörimisnopeutta ja välittää moottorille aina pienempi nopeus kuin
    25 kmH saavuttaakseen erittäin suuren todellisen nopeuden aktiivisella moottorilla. Suurin nopeusrajoitus määräytyy siis moottorin tehon perusteella, joka lisätään jalkojen ilmaisemaan tehoon.
    Rebel kommunikoi näyttöjen kanssa, jotka näyttävät todellisen nopeuden ja ajokilometrit.
    Ribelle voidaan asentaa sähköpyöriin näiden ohjeiden kannessa olevilla näytöillä.
    Nopeudenvapautus voidaan aktivoida ja deaktivoida haluttaessa, ja se säilyttää asetuksen myös sen jälkeen, kun pyörä on sammutettu. KÄYTTÄÄ
    Ensimmäinen asennus
    Kun Ribelle on asennettu edellisillä sivuilla kuvatulla tavalla, on tarpeen jatkaa lyhyellä nollaus- ja oppimismenettelyllä: – Kytke sähköpyörä päälle ja aseta mikä tahansa aktiivinen tukitaso (EI POIS).
    – Kirjoita sivukomentoon seuraava järjestys: -, +, -, +, -, +, -, + (miinus, plus, miinus, plus, miinus, plus, miinus, plus)
    – Näyttöön tulee numero 88.8 vahvistamaan, että aiemmin tallennetut tiedot on nollattu
    – Odota, kunnes numero 99.9 tulee näyttöön
    – Poljin noin kilometriä kohtuullisella nopeudella (noin 15 kmH) ja huomaat, että luku 99,9 putoaa yhden desimaalin jokaisella pyörällä
    vuoro.
    – Pysäytä, kun luku saavuttaa 0,0:n.
    – Näyttöön tulee hetkeksi numero 55.5 kalibroinnin vahvistamiseksi.
    AKTIVOINTI JA POISTAMINEN Nopeusvapautus
    Voit ottaa nopeusvapautuksen käyttöön ja poistaa sen käytöstä seuraavasti:
    – Kytke sähköpyörä päälle ja aseta mikä tahansa aktiivinen avustustaso (EI POIS)
    – Kirjoita sivukomentoon seuraava järjestys: -, +, -, +, (miinus plus miinus plus)
    – Näyttöön tulee numero 50 aktivoinnin vahvistamiseksi (suuri nopeus) tai 25 deaktivoinnin vahvistamiseksi (alkuperäinen nopeus). Tämä toimenpide voidaan suorittaa myös liikkeellä ollessa.
    RIBELLEN LAITEOHJELMISTON VERSIO
    Jos haluat nähdä Ribelle-laiteohjelmistoversion, ebike on sammutettava, kun se on OFF-aputilassa. Seuraavan uudelleenkäynnistyksen yhteydessä Ribelle-laiteohjelmiston versio näytetään hetken (esimerkiksi 23.3).

    Mikä on SpeedFun Ribelle -viritys Brose-moottorilla varustetulle Fantic-ebikelle?
    SpeedFun Ribelle on ebike-viritys Brose-moottoreilla varustettuun Fantci ebikeen, jonka avulla voit lisätä ebike-pyörän nopeutta poistamalla 25 km/h nopeuteen asetettu lohko. SpeedFun Ribellen avulla aktiivista apua lisätään nopeuksiin, jotka voivat ylittää 60 km/h (info), hyödyntäen täysin moottorin potentiaalia.
    Tämä nopeudenrajoitin on yhteensopiva vain ja yksinomaan Fantic-sähköpyörien kanssa, jotka on varustettu Brose Alu (alumiini) tai S-Mag (magnesium) moottorilla ja Comfort-näytöllä tai Brose Allround-, Central- ja Remote-näytöllä.
    SpeedFun Ribelle on erittäin pieni laite, jonka mitat ovat vain 38 x 16,5 x 7,5 mm. Se on varustettu yhteensopivilla liittimillä, joiden ansiosta ebikeä ei tarvita fyysisesti, eivätkä ne muuta sähkövastuksen ja vesitiiviyden ominaisuuksia.
    SpeedFun Ribelle ebike Tuning for Fantic näyttää aina todellista dataa näytöllä, ja se voidaan aktivoida tai poistaa käytöstä painamalla yksinkertaista näppäinsarjaa suoraan ebike-ohjaustangon säätimestä. Laitteen aktivointi ja deaktivointi näkyvät näytöllä.
    SpeedFun Ribelle for Fantic ebike käynnistyy erityisen toiminta-algoritminsa ansiosta, kun 16 km/h saavutetaan ilman, että pyöräilijä huomaa eroa avustamisessa. Se ei puutu millään tavalla pienillä nopeuksilla. Tämä tärkeä varotoimenpide on otettu käyttöön tehohäviöiden, vikojen tai “hikka”-toimintojen välttämiseksi.

    Ebike Fantic Brose-moottorilla, johon Ribelle-laite asennettiin onnistuneesti
    (tämä luettelo on havainnollistava eikä tyhjentävä)
    – Fantastinen XFT 1.5 Carbon Factory
    – Fantastinen XFT 1.5 Carbon Race
    – Fantastinen XFT 1.5 Carbon Sport
    – Fantastinen XFT 1.5 Carbon
    – Fantastinen XFT 1.5 Sport
    – Fantastinen XFT 1.5
    – Fantastinen XMF 1.7 Carbon Race
    – Fantastinen XMF 1.7 Carbon
    – Fantastinen XMF 1.7
    – Fantastinen XEF 1.9 Factory
    – Fantastinen XEF 1.9 Race
    – Fantastinen XXF 2.0 Factory
    – Fantastinen XXF 2.0 Race
    Pääominaisuudet
    – Täysin näkymätön ulkoisesti
    – Näytä oikeat tiedot näytöllä
    – Se voidaan asentaa/poistaa milloin tahansa yhteensopivien liittimien ansiosta ja sen koko on vain 38 x 16,5 x 7,5 mm
    – Mahdollistaa nopeuksien saavuttamisen avustuksella jopa yli 60 kmH (info)
    – Helppo asentaa, käyttövalmis, kytke ja mene
    – Yhteensopiva vain ja yksinomaan Fantic-e-pyörien kanssa, jotka on varustettu Brose-moottoreilla ja Comfort-näytöllä tai Brose Allround-, Central- ja Remote-näytöllä (* näyttö ei sisälly hintaan)
    – Voidaan aktivoida ja deaktivoida näppäinsarjalla
    – Se oppii itse sähköpyörän parametrit, tallentaa ja ylläpitää haluttuja asetuksia
    – Sisäinen laiteohjelmisto päivitettävissä kaikkiin uusiin SpeedFun-tiimin kehittämiin algoritmeihin (laite on lähetettävä)

    GENERAL INFO
    The purpose of Ribelle for Brose is to manipulate the rotation speed of the rear wheel and to communicate to the engine a speed always lower than
    25 kmH in order to obtain a very high real speed with active engine. The maximum speed limit will therefore be dictated by the power of the engine added to the power expressed by one’s legs.
    Rebel communicates with displays that will indicate real speed and mileage.
    Ribelle can be installed on e-bikes with the displays indicated on the cover of these instructions.
    The speed release can be activated and deactivated at will and maintains the setting even after the bike is turned off. USE
    First installation
    Once Ribelle has been installed as indicated in the previous pages, it is necessary to proceed with a short reset and learning procedure: – Turn on the e-bike and set any of the active assistance levels (NOT OFF)
    – Type the following sequence on the side command: -, +, -, +, -, +, -, + (minus, plus, minus, plus, minus, plus, minus, plus)
    – The number 88.8 appears on the display to confirm that the previously stored data has been reset
    – Wait for the number 99.9 to appear on the display
    – Pedal for about one km at a moderate speed (about 15 kmH) and you will notice that the figure 99.9 will drop by one decimal place every wheel
    turn.
    – Stop when the figure reaches 0.0.
    – The number 55.5 appears briefly on the display to confirm calibration.
    ACTIVATION AND DEACTIVATION Speed ​​Release
    To activate and deactivate the speed release, you need to:
    – Turn on the e-bike and set any of the active assistance levels (NOT OFF)
    – Type the following sequence on the side command: -, +, -, +, (minus plus minus plus)
    – The number 50 appears on the display to confirm activation (High speed) or 25 to confirm deactivation (original speed). This procedure can also be performed on the go.
    FIRMWARE VERSION OF RIBELLE
    To view the Ribelle firmware version it is necessary to turn off the ebike when it is in OFF assistance. At the next restart, the Ribelle firmware version will briefly be displayed (for example 23.3).